Biodegradable Refill cartridges
for EcoPro

EcoPro REFILLS x2
Every TAPP Water Refill has a maximum lifetime of 3 months (1200 liter).

About our Filters

Easy replacement of your filter.
Two cartridges in one pack for 6 months clean water.

the product

Product specifications

Everything you need to know about our TAPP Filters.

Dimensions: 12.1 x 8 x 7 cm
Weight: 180 g

  • Carbon block, 2 pcs.

Use hot water only in the NO filtered position.
Avoid washing the filter with soap.
If you haven’t used the filter in several days, run the filtered water for 20 seconds.
Avoid exposing the filter to heat.
The carbon block should be changed every 3 months.
At the end of the cartridge cycle, the TAPP Water EcoPro filter housing must be reused.
Remove the carbon block from inside and put in a new one. Screw the cartridge back on and you’re ready for the next 3 months.

The spinning cap is used to mark the week you started a new cartridge. The turn is manual. The numbers indicate months of the year and the dots the weeks.

Eliminate more than 100 substances.
Limescale, chlorine (the cause of the unpleasant taste), sand, rust and sediments, lead, mercury, salmonella, legionella, pesticides, herbicides, medication waste, nitrates and other substances > 1-2 μm (micrometres)

The refills, made of activated carbon, use 5-step Ultra-Advanced Microfiltration technology to filter more than 100 substances from tap water while retaining the essential minerals in the original water.

Technology

Built to exceed NFS 53 requirements. TAPP Water refill cartridge are made from organic coconut shells and filters contaminants such as lead, other heavy metals, micro plastics, chlorine, VOCs, TTHMs, PFCs and more – down to 2 microns.

Each advanced biodegradable refill cartridge is made out of the highest quality coconut shell. Carbon blocks are tested according to NSF 53 standards and are efficient in removing 80+ contaminants including lead, chlorine, THMs and more

4 l / min. or 15 seconds to fill a liter.

after 3 months from first use

up to 1200 liters (approx. 13 liters / day) for 3 months

The materials we use for our filters reinforce our commitment to sustainability, quality and durability.

The cartridge housing is made of PLA plastic free of toxins such as BPA and phthalates, made from natural raw materials.

The carbon block inside the cartridge housing that filters your water is made from coconut shells (70%), which biodegrades into CO2 and water, and UHMW (30%), which is inert and stable and it does not accumulate in marine life.

We also use two small pieces of silicone to ensure that the carbon block remains in place thus ensuring maximum filtering efficiency. These decompose into amorphous silica, carbon dioxide, and water.

The best filter technology on the market

NO BPA

NO PHTHALATES

save money and the nature​

the opinion of others

more information in our Blog

    Cart